DetailsThis heavy duty planer offers performance and value, loaded with standard features not found on other machines in its class. The 5HP motor and 20 in. planing capacity will handle the most demanding work. The helical cutterhead provides quieter operation and finer finishing, and the four-sided knife inserts seat themselves without requiring a set-up gauge. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. Precision ground and polished cast iron table. Heavy cast iron extension wings ensure a flat, smooth cut.
- Maximum Planing: 20 In.
- Maximum Planing Thickness: 8 In.
- Maximum Depth of Cut: 3/32 In.
- Minimum Planing Length: 6¾ In.
- Cutterhead Diameter: 3 3/16 In.
- Cutterhead Speed: 5000 RPM
- Feed Rate: 24 and 31 FPM (16 and 20 FPM with gear change)
- Number of Knives: 132 Four-sided inserts
- Table Size: 20 x 55 1/2 In.
- Dust Port Diameter: 5 In.
- Dust Collection Minimum CFM Required: 900 cu.ft/min
- Readout Scale: inch/ metric
- Table Support: 4 column
- Number of Speeds: 4
- Rotation: Fwd
- Amps: 21
- Motor Power: 5 HP
- Overall Dimensions: 41.375 x 36.625 x 26 In.
Dust Hood, Cast Iron Extension Tables, Handwheel, Handle, Low Speed Gear Kit, Open-End Wrenches, Hex Wrenches, Hardware Bags, 1/4 In. Drive Screwdriver, T25 Torx Drive Socket Adaptor, Set of 10 Knife Inserts. Owner's Manual
- Additional Information
Hp Range 3-1/4 HP - 5 HP Power Source Corded Size Range 15 Inch & up