Delta S26-271L ShopMaster 12 Inch Sliding Single Bevel Miter Saw with Laser

More Views

Delta S26-271L ShopMaster 12 Inch Sliding Single Bevel Miter Saw with Laser
15 Amp, 120V Motor. 4000 RPM. Up to 13.5” cross cut capacity at 90 degrees. 45 degree left and 45 degree right miter capacity, with 7 positive miter stops and front lock control.


This tool features a powerful 15 Amp motor with all ball bearings and externally accessible brushes for ease of servicing. Adjustable fence - the miter fence supports the workpiece when making all cuts. The extension length is adjustable. The throat plate supports the workpiece and provides a safe working surface. The miter lock knob securely locks the saw at desired miter angles. Support extensions - use these to help support large pieces when necessary. Miter scale with positive stops - positive stops have been provided at 0°, 15°, 22.5°, 31.6°, and 45°. The blade stops have been provided on both the left and right side of the miter table. The horizontal work clamp helps to position and secure the workpiece to the fence, ensuring safer operation and more accurate cuts. Base - supports the tool and features mounting holes. Mounting holes enables you to securely mount the tool to a stable surface. The included blade wrench features a Phillips screwdriver at one end and a hex key at the other. Use the hex key when installing or removing blade and the Phillips screwdriver when removing or loosening screws. When not in use, the wrench can be stored in the base of the saw. Sturdy, large die-cast aluminum work table provides a level and sturdy work surface. The bevel lock knob secures the saw at the desired angle for bevel cuts. There are 2 positive stop screws underneath the bevel lock knob for making fine adjustments at 0° and 45°. The included dust bag attaches and detached quickly with the integrated clamp for easy cleaning. Upper and lower blade guards. The lower blade guard is made of shock-resistant, see-through plastic that provides protection from each side of the blade. It automatically retracts over the upper blade guard as the saw is lowered into the workpiece. A 12 in. blade is included with the compound miter saw. It will cut materials up to 4 in. thick or 14 in. wide, depending upon the angle at which the cut is being made. The saw blade is activated by an easy-to-use trigger switch. When not in use the saw should be disconnected from the power supply and switch locked in the off position using a padlock (not included) inserted through the hole in the switch trigger. A lock with a long shackle may be used. The padlock and key should be stored in separate locations. The spindle lock button locks the spindle preventing the blade from rotating while removing or installing the blade screw. Slide lock allows head to move front to rear for cutting wide material up to 14 in. wide. An electric brake has been provided to more quickly stop blade rotation after the switch is released. For more accurate cuts, a laser guide is included with your miter saw. When used properly, the laser guide makes accurate, precision cutting simple and easy.

Miter stop at most used crown molding angles 0°, 22.5°, 31.6°, and 45° left and right. 0° to 45° left and 0° to 50° right miter angle. capacities. Up to 13.5 in. cross cut at 90°. Max miter cut at 45° 9.5 in. 15 Amps, 120 volts. Speed 4,000 RPM. Blade size 12 inch diameter. Miter range 45° right. Bevel stops 0°, 33.9°, 45° RH. Miter Detents (positive stops); 0°, 15°, 22.5°, 31.6°, 45° left and right. Arbor size 1 inch diameter. 3 year warranty.


(1) ShopMaster S26-271L ShopMaster 12 Inch Sliding Compound Miter Saw with Laser, (1) 12 Inch Blade, (1) Dust Collection Bag, (1) Horizontal Work Clamp, (1) Miter Lock Knob, (1) Blade Wrench, (2) Support Extensions.

Additional Information

Additional Information

Drive Type 1" Arbor
Power Source Corded
Size Range 11 Inch - 12-7/8 Inch
Use For Material Wood