DetailsThe TS REQ features incredible portability and unbelievable ease of use, and you have a precision-cutting solution like no other, at home in the highest-end cabinet shop as well as an onsite remodel. When used with Festool guide rails, you have ultimate control over the TS saw for perfectly straight cuts. Add the replaceable splinterguard, and a splinter-free cut is achievable on both sides of the blade. Scribe Line equals cut line. The TS 55 makes the actual cut right on the edge of the scribe line, even on bevel cuts. Simple depth adjustment allows you to expose only the part of the blade necessary for the cut. The plunge action allows cut placement anywhere on the cut line for straight cuts or cut-outs into material. Spring-loaded riving knife (splitter) retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open so that the material does not pinch the blade. Reduces the chance of kickback. MMC Electronics, variable speed allows you to match the speed of the saw to the material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw’s motor from thermal and current overload. Rotating dust port directs dust away from the saw, user, and the material or connect it to a Festool CT dust extractor for tool-triggered dust capture. Blade changes are easier and faster using the FastFix system. When engaged, the power switch and arbor are locked simultaneously. The saw is also locked into a position to facilitate easy arbor bolt removal. The triple motor bearing improves the smoothness of cutting action and extends the service life of the tool. Splinter-free cutting on both sides of the cut line. Eliminate tear out on both sides of the cut line with the guide rail and replaceable splinter guard.
The CT 26 is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. Represents greater efficiency in dust extraction, noise reduction, and less energy consumption versus a constant-on unit. Variable suction force allows you to regulate the suction based on your tasks. Includes a self-cleaning bag which prevents dust particles from caking inside the bag which reduces suction. Low-profile, flat-top design allows the CT top to double as a tool rest as well as an integrated hose garage and docking station that allows the connection of Festool Systainers (not included). The low center of gravity, integrated center handle, and extra large wheels make navigating easy without tipping over. A parking brake can even be locked to prevent unintentional roll off or drifting. The supplied 11-1/2 ft. anti-static (AS) hose is long enough for power tool and general work site clean up tasks. Supplied with 11-1/2 foot long anti-static hose that is flexible and kink-resistant and will minimize shock hazards as well as reduce static cling. For wet (water) clean up tasks, the CT will shut off automatically when full thanks to Level Stop technology. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. Large wheels, low center of gravity, and ergonomically balanced design allows you to move the CT effortlessly. Sys-dock and hose garage feature allows for the storage and transport of Festool Systainers (not included) on the top of the flat, low-profile unit.
- TS 55 REQ Plunge Cut Track Saw
- Imperial scale for setting the depth of cut
- Arbor size: .787" (20 mm)
- Bevel cuts: 0º - 45º
- Cutting depth on guide rail: 1-15/16" (50 mm) straight down and 1-7/16" (37 mm) at 45°
- Cutting depth without guide rail: 2 1/8" (55 mm) straight down
- Power consumption: 1200 watts / 10 amps 120 v AC
- Saw blade diameter: 6-1/4" (160 mm)
- Saw blade speed: 2,000 - 5,200 rpm
- Weight: 9.92 lbs. (4.5 kg)
- CT 26 HEPA Dust Extractor
- Container Capacity: 6.9 gal. (26 liters)
- Dimensions (in.): 24.8 x 14.4 x 21.5
- Filter Bag Capacity: 6.3 gal.
- Filter Type: HEPA
- Max. Suction Force: 137 CFM
- Noise Level: 62 - 72 db(A)
- Power Consumption: 350 - 1200 watts, 2.9 - 10.0 amps
- Static Water Lift: 96"
- Weight: 28.7 lbs
561556 TS 55 REQ Plunge Cut Track Saw, 55" guide rail, high-quality carbide blade, limit stop, Plug-it power cord, splinterguard, Systainer, 583492 CT 26 HEPA Dust Extractor, 27mm antistatic hose, cord Wrap, hose garage, self-cleaning filter bag.
- Additional Information
Includes 2 Tools Power Source Corded