Festool PN574368 MFK 700 and CT MINI HEPA Package

Festool PN574368 MFK 700 and CT MINI HEPA Package
MFK 700 Modular Trim Router + CT MINI HEPA Dust Extractor Package. With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps. Micro-adjustable depth control to 1/256 inch (1/10 mm) with dual locking columns for precise routing control. The CTMINI is a wet/dry vac with tool-triggered auto start function that runs when connected tool runs and with variable suction force for different applications.


Trim laminate and edge band or rout grooves for inlays easily with the light weight and maneuverable MFK 700. Allowing you to use bearing-less bits when used with the attachable base feeler bearing. 1/256" (1/10 mm) fine depth adjustments and exceptional dust extraction make this an ideal router for all of your light routing tasks. Due to the nature of the horizontal base design, there is a limit to the bit size for use in this configuration. Do not use a bit with a cutting length greater than 5/8" (16 mm) and a shank length of 1-13/16" (46 mm). For greatest range of adjustment a 3/4" (19 mm) bit diameter is recommended. Powerful 720 watt (6.0 amp) motor can easily tackle most trimming, profiling and routing applications with variable speed and detachable cord. Threaded insert to accept template guides and phenolic resin baseplate to easily glide on a surface without marring the material to be routed. Multi-Material Control (MMC) Electronics ensures the motor of the MFK 700 provides a constant spindle speed under load. The motor is also protected by the smooth start-up and temperature monitoring functions. Variable Speed Control allows you to control the speed of the spindle based on material, bit type and application. The MFK 700 Router features a one-wrench collet. A button locks the spindle in place allowing the collet to be loosened and tightened quickly with a single tool. The integrated guide handle on the vertical and horizontal bases provide comfort and control while routing. The guide handle also acts as one of two mechanisms for locking the micro-adjustable depth of cut. Has a center line indention on each side of the vertical base which allows you to align the center of the bit with the cut line. Both the horizontal and vertical bases for the MFK 700 offer a large, stable bearing surface. Sliding Dust Cover prevents dust from exiting the top of the router when not using the dust extraction hood. Features a base plate material that is designed to prevent scratches, glide easily and create a stable & flat bearing surface. The vertical base includes a threaded insert which accepts template guides adding to the overwhelming versatility of this router. The swivel connector allows the dust extractor hose to move freely and prevents binding. Use the Sensor Bearing Guide, a standard component of the horizontal base set, to aid in guiding the router around the workpiece. The smooth, controlled movement of the Sensor Bearing Guide will ensure that you end up with a perfect cut even around corners or irregular shapes.

The CT MINI is compact and light weight, but has enough capacity for common jobsite tasks. Sporting large wheels and double casters, this unit can easily negotiate obstacles in the shop or on the worksite. With 137 CFM and only 62 dB (on low setting), the CT MINI can quickly and quietly remove large amounts of debris, with minimal noise distractions. One disposable filter comes standard on this model, with the option of additional dry and wet filters to meet your needs. The integrated hose garage keeps hoses and cords well organized and makes Systainer transport simple and efficient. Smooth start, infinitely adjustable electronic air flow control and tool-triggered or manual on-off switch ensures convenient and efficient dust control. As with all CT dust extractors, the 1-1/16" x 11.5' (27mm x 3.5m) antistatic hose comes standard. Quick on/off foot actuated brake prevents roll-off during usage or during transport. The ergonomic handle makes maneuvering these small and light dust extractors a breeze. The main filter can be changed without using tools. The internal sensors monitor the fluid level, for wet applications, and switch the mobile dust extractor off automatically when the container is full.

  • MFK 700 Modular Trim Router
  • Column stroke: 9/16" (14 mm)
  • Drive shaft speed: 10,000 - 26,000 RPM
  • Maximum bit diameter: 1" (26 mm)
  • Power consumption: 720 watts / 6.0 amps
  • Weight: 4.2 lbs (1.9 kg)
  • CT MINI HEPA Dust Extractor
  • Container/filter bag capacity: 2.6 gal/2 gal (10 liters/7.5 liters)
  • Depth x width x height: 17.5" x 13.5" x 16.5" (440 x 340 x 420 mm)
  • Maximum suction capacity: 137 CFM (2807 l/min)
  • Maximum vacuum: 96" static water lift (20000 Pa)
  • Noise (sound level): 62 dB (low setting) - 72 dB (maximum setting)
  • Power consumption: 400-1200 watts / 3.3-10 amps 120 v AC
  • Weight: 21 lbs. (9.5 kg)

MFK 700 Modular Trim Router, CT MINI HEPA Dust Extractor, 1.5° Horizontal base and feeler bearing set, Collets, Dust extraction hood, Plug-it power cord, Standard threaded base for U.S. guide bushing, Vertical base, Systainer, Antistatic suction hose, Filter bag, Filters.

Additional Information

Additional Information

Includes 2 Tools
Power Source Corded