Festool PAC574368 MFK 700 and CT 36 AC Package

Festool PAC574368 MFK 700 and CT 36 AC Package
MFK 700 Modular Trim Router + CT 36 AutoClean Dust Extractor Package. With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position. Micro-adjustable depth control to 1/256" (1/10 mm) with dual locking columns. CT 36 AutoClean is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. This represents greater efficiency in dust extraction, noise reduction, and with less energy consumption.


Trim laminate and edge band or rout grooves for inlays easily with the light weight and maneuverable MFK 700. Allowing you to use bearing-less bits when used with the attachable base feeler bearing. 1/256" (1/10 mm) fine depth adjustments and exceptional dust extraction make this an ideal router for all of your light routing tasks. Due to the nature of the horizontal base design, there is a limit to the bit size for use in this configuration. Do not use a bit with a cutting length greater than 5/8" (16 mm) and a shank length of 1-13/16" (46 mm). For greatest range of adjustment a 3/4" (19 mm) bit diameter is recommended. Powerful 720 watt (6.0 amp) motor can easily tackle most trimming, profiling and routing applications with variable speed and detachable cord. Threaded insert to accept template guides and phenolic resin baseplate to easily glide on a surface without marring the material to be routed. Multi-Material Control (MMC) Electronics ensures the motor of the MFK 700 provides a constant spindle speed under load. The motor is also protected by the smooth start-up and temperature monitoring functions. Variable Speed Control allows you to control the speed of the spindle based on material, bit type and application. The MFK 700 Router features a one-wrench collet. A button locks the spindle in place allowing the collet to be loosened and tightened quickly with a single tool. The integrated guide handle on the vertical and horizontal bases provide comfort and control while routing. The guide handle also acts as one of two mechanisms for locking the micro-adjustable depth of cut. Has a center line indention on each side of the vertical base which allows you to align the center of the bit with the cut line. Both the horizontal and vertical bases for the MFK 700 offer a large, stable bearing surface. Sliding Dust Cover prevents dust from exiting the top of the router when not using the dust extraction hood. Features a base plate material that is designed to prevent scratches, glide easily and create a stable & flat bearing surface. The vertical base includes a threaded insert which accepts template guides adding to the overwhelming versatility of this router. The swivel connector allows the dust extractor hose to move freely and prevents binding. Use the Sensor Bearing Guide, a standard component of the horizontal base set, to aid in guiding the router around the workpiece. The smooth, controlled movement of the Sensor Bearing Guide will ensure that you end up with a perfect cut even around corners or irregular shapes.

The CT AutoClean has an integrated filter cleaning mechanism that periodically knocks the dust free of the filter. This guarantees maximum air flow and prevents the filter from becoming caked with dust. The filter cleaning frequency is controlled by a dial and can be completely disabled. The CT AutoClean can be used as a regular dust extractor when run without the AutoClean enabled. Includes an ultra-light weight, flexible anti-static (AS) hose for use with the PLANEX Drywall Sander and other tools that accept a 36mm (1-1/2") hose. Automatic Tool Start & adjustable suction with tool triggered or manual on-off switch and infinitely variable suction force, can be used wet or dry. Sys-dock and hose garage feature allows for the storage and transport of Festool Systainers (not included) on the top of the flat, low-profile unit. An ergonomic handle, large wheels, low center of gravity, and ergonomically balanced design allows you to move the CT effortlessly around the jobsite. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. With 137 CFM and only 62 dB (on the low setting), the CT 36 can quickly and quietly remove large amounts of debris, with minimal noise. A high performance 1-micron filter comes standard and offers the ultimate in clean air and filtration. The CT 36 AutoClean is specifically designed to complement the PLANEX Drywall Sander but can also be used as a general dust extractor for all tools. An optional smaller 27mm diameter hose may be required for some tools, such as sanders.

  • MFK 700 Modular Trim Router
  • Column stroke: 9/16" (14 mm)
  • Drive shaft speed: 10,000 - 26,000 RPM
  • Maximum bit diameter: 1" (26 mm)
  • Power consumption: 720 watts / 6.0 amps
  • Weight: 4.2 lbs (1.9 kg)
  • CT 36 AutoClean Dust Extractor
  • Container Capacity: 9.5 gal
  • Dimensions (in.): 24.8" x 14.4" x 23.4"
  • Filter Bag Capacity: 8.9 gal
  • Max. Suction Force: 137 CFM
  • Noise Level: 62 - 72 db(A)
  • Power Consumption: 350-1200 watts, 2.9-10.0 amps
  • Static Water Lift: 96"
  • Weight: 29.8 lbs.

MFK 700 Modular Trim Router, CT 36 AutoClean Dust Extractor, 1.5° Horizontal base and feeler bearing set, Collets, Dust extraction hood, Plug-it power cord, Standard threaded base for U.S. guide bushing, Vertical base, Systainer, 36mm Antistatic Hose, Cord Wrap, Hose Garage, Self-Cleaning Filter Bag.

Additional Information

Additional Information

Includes 2 Tools
Power Source Corded