DetailsThe HL 850 lets you cut flush to an adjacent surface because it can plane across the entire width of the rabbet. Because the planer head is mounted to one side, it sits flush with the opposite side of the planer housing. The retractable side guard makes planing safer, and it swings up and to the side as the rabbet depth increases. Planing up to the edge in deep rabbets is no longer a problem. Single knife cutter-head with spiral design with replaceable cutting knife for a smooth, quiet and “chatter-free” cut. Multiple head options to create rustic architectural effects in beams and flooring. Unlimited rabbeting depth with flush cutter side design and retractable spring-loaded guard. Rotary handle depth adjustment allows precise depth setting to 1/256" (1/10 mm) up to 9/64" (3.5 mm). MMC Electronics - equipped with soft-start for no-jolt starts, and constant speed under load, for consistent cutting speed and smooth results. With the addition of a bench unit stand and angle stop (not included), the HL 850 becomes a stationary jointer for working edges. Efficient chip extraction with left or right side mounting. Quick Blade Changes just loosen 3 screws, replace the blade, tighten back up and that is it! The blade is self-aligning. Thumb-Lock Depth Control makes depth setting a streamlined one-hand operation so you can easily adjust your depth settings to match the resistance of the material.
The CT MINI is compact and light weight, but has enough capacity for common jobsite tasks. Sporting large wheels and double casters, this unit can easily negotiate obstacles in the shop or on the worksite. With 137 CFM and only 62 dB (on low setting), the CT MINI can quickly and quietly remove large amounts of debris, with minimal noise distractions. One disposable filter comes standard on this model, with the option of additional dry and wet filters to meet your needs. The integrated hose garage keeps hoses and cords well organized and makes Systainer transport simple and efficient. Smooth start, infinitely adjustable electronic air flow control and tool-triggered or manual on-off switch ensures convenient and efficient dust control. As with all CT dust extractors, the 1-1/16" x 11.5' (27mm x 3.5m) antistatic hose comes standard. Quick on/off foot actuated brake prevents roll-off during usage or during transport. The ergonomic handle makes maneuvering these small and light dust extractors a breeze. The main filter can be changed without using tools. The internal sensors monitor the fluid level, for wet applications, and switch the mobile dust extractor off automatically when the container is full.
- HL 850 Planer
- Cutting depth: 0 - 9/64" (0 - 3.5 mm)
- Imperial scale for setting the depth of cut
- Drive shaft speed: 11,000 rpm
- Head width: 3 15/64" (82 mm)
- Noise level at idle: 79 dB (A)
- Power consumption: 850 watts / 7 amp 120 volts AC
- Rabbeting depth: Unlimited
- Weight: 8.6 lbs. (3.9 kg)
- CT MINI HEPA Dust Extractor
- Container/filter bag capacity: 2.6 gal/2 gal (10 liters/7.5 liters)
- Depth x width x height: 17.5" x 13.5" x 16.5" (440 x 340 x 420 mm)
- Maximum suction capacity: 137 CFM (2807 l/min)
- Maximum vacuum: 96" static water lift (20000 Pa)
- Noise (sound level): 62 dB (low setting) - 72 dB (maximum setting)
- Power consumption: 400-1200 watts / 3.3-10 amps 120 v AC
- Weight: 21 lbs. (9.5 kg)
HL 850 Planer, CT MINI HEPA Dust Extractor, Parallel guide, Rabbet depth guide, Solid carbide standard blade, Standard planer head, Systainer, Antistatic suction hose, Filter bag, Filters.
- Additional Information
Includes 2 Tools Power Source Corded