Spectra HV101GC-3 Metric Horizontal Vertical Rotary Laser Kit

More Views

Spectra HV101GC-3 Metric Horizontal Vertical Rotary Laser Kit
The Spectra Precision Laser HV101 is a professional multipurpose construction laser for interior and exterior applications.


The Spectra Precision Laser HV101 is a professional multipurpose construction laser for interior and exterior applications. Exceptional versatility allows it to handle a wide variety of horizontal, vertical and plumb applications. Automatic electronic self-leveling for level and plumb - turn it on and start working. Sends a continuous 360-degree laser reference over the entire work area. Easy to set up and use and is rugged enough for the toughest job site. Durable construction enable the HV101 laser to survive a drop of up to 1 meter (3 feet) onto concrete. IP54 environmental sealing means the HV101 is unaffected by dust or moisture. Simple controls allow operators to carry out many functions with “one-touch” commands. A 3 year “No Downtime” limited warranty provides instant, over-the-counter exchanges if ever a problem is experienced. Highly visible beam is easy to see. Remote control allows operation of key functions over the job site. Intuitive, one-touch operator controls for quick start up and adjustment. Multiple scanning angles and rotating speeds to match various conditions. Built-in vertical stand and 5/8"" x 11"" horizontal and vertical mounting. Manual slope control to match known references. Uni-mount feature allows for application setups with no extra accessories. Includes the HR320 receiver which features dual LCD’s on front and rear are ideal for general exterior applications. Fine or standard accuracy fits all application needs. Strong waterproof housing (IP67) protects the unit from dust, moisture and accidental drops. Loud 100 dBA speaker can be heard on the nosiest job sites. Normally used for acoustical ceiling installation, drywall installation, interior finishing work, residential construction, small commercial construction and outdoor short range general construction. This particular kit, HV101GC-3, is a metric kit and comes with a 5 meter grade rod.
  • HV101 Horizontal Vertical Rotary Laser
  • Laser Source: <5 mW @ 635 nm, Class 3A
  • Laser Accuracy: ±1/8 in at 100 ft (±3 mm at 30 m) (±20 arc seconds)
  • Operating Range: 100 ft (30 m) minimum visual 1,000 ft (300 m) diameter with receiver
  • Self-leveling Range: ±5 degrees
  • Compensation Method: Electronic self-leveling
  • Power source: 2 x “D” Alkaline Batteries
  • Battery life: 50 hours Alkaline 45/25 hours user provided Ni-MH/Ni-CD
  • Battery Status LED: Flashing red LED
  • Rotation speed: Four preset speeds 0, 50, 200, 600 RPM
  • Scan angles: Five preset angles 3°, 8°, 45°, 90°, 180°
  • Out-of-level warning: Rotor stops, laser shuts off, red out-of-level LED flashes
  • Operating temperature: 23 °F to 113 °F (-5 °C to 45 °C)
  • Storage temperature: -4 °F to 158 °F (-20 °C to 70 °C)
  • Warranty: 3 Year Limited with Instant Exchange
  • Water resistant: Yes, and IP54 sealing
  • Size: 8.5L × 6.7W × 6.0H in (21.6L × 17.1W × 15.2H cm)
  • Weight: 3.3 lbs (1.5 kg)
  • HR320 Receiver
  • Two On-Grade Sensitivities: Fine 1/16 in (2 mm), Standard 1/4 in (6 mm)
  • LCD Channels: 5
  • Battery Life: 70 hrs
  • Automatic Shutoff: 30 minutes
  • Dust & Waterproof: Yes IP67
  • Weight: 12 oz (.33 kg)
  • Warranty: 2 Years

HV101GC-3 General Contractor's Kit, HV101 horizontal/vertical laser, HR320 receiver, rod clamp, wall mount, remote, ceiling target, laser glasses, tripod, GR153 metric rod (5 m) and system case.

Additional Information

Additional Information