DetailsThe SawStop Contractor Saw offers versatility and safety. Combines SawStop’s legendary stopping mechanism with features like advanced dust collection and professional upgrade options. SawStop safety system prevents serious injury with always-on protection. The blade carries a small electrical signal. When skin contacts the blade, the signal changes because the human body is conductive. The change to the signal activates the safety system. An aluminum brake springs into the spinning blade, stopping it. The blade’s angular momentum drives it beneath the table. Power to the motor is shut off. All this happens in less than 5 milliseconds. Resetting is easy just replace the blade and brake cartridge. The low profile blade guard can be used even on narrow cuts. Riving knife minimizes kickback. Below-table dust shroud and 4"" dust. The zero-clearance insert supports the wood throughout the cut. A diagnostic self-check runs continuously when you start the saw. The large start/stop paddle with hands-free shutoff can be stopped with your knee. Main power switch with lockout key. When the power goes out, the saw stays off. The safety system won’t allow the motor to restart automatically when the power comes back on. Left-tilting blade. Equipped with 52"" professional grade fence. Getting the right measurement is easy with magnified indicator lenses and smooth sliding surfaces on the T-Glide Professional Series Fence. Easy to change between blade guard and riving knife with our tool-free blade guard quick change mechanism. Long-lasting Poly-V ribbed belt can run continuously while delivering greater power. The safety bypass switch allows users to cut conductive material without activating the brake. You’ll find more cast iron in the SawStop Contractor Saw, resulting in reduced vibration. Elevation system operates on a vertical slide rather than on an arc providing you with consistent alignment. Widely spaced glide plates and adjustable rail provide smooth travel. Powder-coated finish. 62mm main arbor bearing. Compatible with 10"" standard blades and 8"" dado sets. Quick Start guide and color coded, easy to follow manual and installation instructions. User configurable to 220V. This saw only ships within Florida.
- Motor: 1.75 HP, 110-120V, 15A
- Dimensions: 85-1/4"" w x 41"" d x 34-3/4"" h
- Footprint: 25-3/4"" w, 27"" d
- Cast iron table: 20"" w, 27"" d
- Extension wing: 12"" w, 27"" d
- Weight (approx.): 390 lbs.
- Blade: 10"" diameter, 5/8"" arbor
- Blade tilt: Left
- Maximum depth of cut: 3-1/8&uot;
- Dado diameter: 8""
- Dado max. width: 13/16""
- Dust collection port: 4"" diameter
- Insert: Zero-clearance
- Blade guard: Polycarbonate, thin profile
- Riving knife/ splitter: 2mm thick
- Arbor bearing: 62mm
CNS175-TGP52 1.75HP Contractor Saw with 52"" Professional T-Glide fence system, rails and extension table. Owner's Manual
- Additional Information