Features

Unique parallelogram support system allows the table to move in the same arc as the cutterhead when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker. Cast-iron assures less vibration; cabinet stand completely encases motor and pulleys to protect from dust and shavings. Specially-designed cast-iron fence is extra long for continued support throughout the cut. Fence is center-mounted and functions as a rear guard on narrow cuts. Modular cutterhead provides a consistently clean cut. Jack-screw arrangement allows easy replacement and adjustment of individual knives. In the event the entire cutterhead has to be removed, a new module can be fitted in place without production down-time. Extra-long infeed table provides a full 76-1/2 in. of work support. Runs on sealed, lubricated-for-life ball bearings.

Specifications

• Motor: 1-1/2 HP, 120/240V (wired 240V), 60 hz, 1 Phase TEFC, 3450 RPM
• Cut Capacity - Width: 8 in. (203 mm)
• Cut Capacity - Depth: 5/8 in. (16 mm)
• Rabbeting Capacity: 5/8 in. (16 mm)
• Cutterhead Speed: 5,500 RPM; 16,500 CPM
• Number of Knives: 3
• Cutterhead Diameter: 3-3/8 in. (86 mm)
• Table Size: 76-1/2 in. (1943 mm)
• Table Length of front table (Infeed): 42 in. (1067 mm)
• Table Length of Rear Table (Outfeed): 32 in. (813 mm)
• Table Height: 32 in. (813 mm)
• Fence Size: 5 in. x 35 in. (127 x 889 mm)
• Fence Tilt: 45° in and out
• Fence Positive Stops: 90°, 45° in and out
• Dust Port Diameter: 4
• Width: 26 in. (660 mm)
• Height: 32 in. (813 mm)
• Length: 76-1/2 in. (1943 mm)
• Weight: 394 lbs (179 kg)

Includes

1-1/2 HP, 120/240 Volts, 60 hz, Single Phase motor, 3-knife cutterhead module, cutterhead guard with wrenches, rabbeting ledge, tilting fence, push blocks, two pulleys, instruction manual.