DetailsPowerful 15.0 AMP motor delivers 1,075-2,150 BPM to handle the most demanding applications. Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity. Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs. Soft start suppresses start-up reaction for more control and better accuracy. Variable speed control dial enables user to match the speed to the application for greater versatility. L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced. L.E.D. power light indicates switch failure or cord damage. Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. Sequential Impact Timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling. Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life. Extended life brushes are longer for more work between service intervals and less downtime. Automatic brush cut-off protects commutator from damage for longer tool life. "No hammering when idling" function helps increase tool life. 2-mode operation for "Hammering Only" or "Hammering with Rotation". One-touch sliding chuck for quick bit changes. Lock-on slide switch for continuous operation ("Hammering Only" mode). Rubberized ergonomic soft grip provides more comfort and control. Recessed operation mode switch helps prevent it from being damaged. Accepts SDS-MAX bits.
- Capacity Concrete (w/core bits): 6-1/4"
- No Load Speed: 130 - 260 RPM
- Blows per Minute: 1,075 - 2,150 BPM
- Impact Energy: 20.0 Joules / 14.8 ft.lbs.
- AMPS (120V): 15.0
- Bit Type: Accepts SDS-MAX Bits
- Overall Length: 23-1/2"
- Net Weight (lbs.): 26.9
HR5210C 2 Inch AVT Rotary Hammer, side handle (158057-6), d-handle (417003-1), depth gauge (321248-4), bit grease (194683-7), and tool case. Owner's Manual
- Additional Information
Drive Type SDS Max Power Source Corded Use For Material Concrete