The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. We’ve packed these machines with functional features that set them apart from the competition. Add real productivity and efficiency to your shop with the "Production Pocket-Hole Standard." This model works with any standard 20-amp 110-volt outlet and features a strong 1-1/2 HP electric motor, single-spindle simplicity, and a cycle time of less than one second. Quickly position two pocket holes across rails of various widths by placing it against one stop, drilling the hole, and then repeating with the rail against the other stop. For drilling pocket holes in panels, the stops simply swing out of the way. Adjustments couldn’t be easier, as the fence adjusts from the top side of the machine to let you center a screw in 1/2" to 1-1/2" (12-38mm) thick material. The clamp hold-down also adjusts to allow materials up to 4" (101mm) thick to be drilled. Changing drill bits is a quick and simple process. Simply loosen the collet with the provided Allen wrench, replace with a new bit, and you are back in production in less than 60 seconds. The industrial-grade motors used in Kreg machines are built for long-lasting service. Kreg machines are also designed to minimize stress on moving parts, greatly reducing the likelihood of failure.
- Motor: 1-1/2 HP, 110 Volt, Single-Phase
- Drill Bits: DKDB Drill Bit 3/8" Shank Diameter, 3/16" Pilot, 1/2" Long
- CFM Rating: 1 CFM Clamp Cylinder (90 PSI/minute)
- Cycle Time: 1 Second
- Material Clamping Capacity: 4"
- Hole-Centering Capability: 1/2" To 1-1/2" Thick
- Weight: 176 Lbs
- Dimensions: 50"H x 24"W x 24"D (40" Table Height)
- Warranty: 5 Years
(1) DK1100 FE Single-Spindle Electric Pocket-Hole Machine.
- Additional Information
Hp Range 1-1/4 HP - 2 HP Power Source Corded