DetailsThe TS REQ features incredible portability and unbelievable ease of use, and you have a precision-cutting solution like no other, at home in the highest-end cabinet shop as well as an onsite remodel. When used with Festool guide rails, you have ultimate control over the TS saw for perfectly straight cuts. Add the replaceable splinterguard, and a splinter-free cut is achievable on both sides of the blade. Scribe Line equals cut line. The TS 55 makes the actual cut right on the edge of the scribe line, even on bevel cuts. Simple depth adjustment allows you to expose only the part of the blade necessary for the cut. The plunge action allows cut placement anywhere on the cut line for straight cuts or cut-outs into material. Spring-loaded riving knife (splitter) retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open so that the material does not pinch the blade. Reduces the chance of kickback. MMC Electronics, variable speed allows you to match the speed of the saw to the material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw’s motor from thermal and current overload. Rotating dust port directs dust away from the saw, user, and the material or connect it to a Festool CT dust extractor for tool-triggered dust capture. Blade changes are easier and faster using the FastFix system. When engaged, the power switch and arbor are locked simultaneously. The saw is also locked into a position to facilitate easy arbor bolt removal. The triple motor bearing improves the smoothness of cutting action and extends the service life of the tool. Splinter-free cutting on both sides of the cut line. Eliminate tear out on both sides of the cut line with the guide rail and replaceable splinter guard.
The MFT/3 has 85% more working area than the older MFT 800, and is 15% lighter than the MFT 1080. Even though the MFT/3 has many improvements, Festool did not abandon features that you have come to trust and enjoy— like perforated tops, side channels for attaching clamps, and folding legs to allow two working heights, and easy transport. Can easily be carried to a jobsite, due to its compact size and light weight. Accurate and repeatable cuts with the guide rail and plunge saw or routers. Clamp faster with uniform holes and Festool clamps. The height has been adjusted from previous models and offers a more comfortable work surface height. Use with legs folded out, at full height, or folded in and set on the floor. The integrated guide rail system allows you to cut with confidence. Adjustable to a maximum cutting depth of three inches, accurately cut materials over 27 inches in width - a feat which is impossible with the largest of miter saws. Combined with Festool TS Series saws, Trion jigsaws and OF Series routers, the guide rail is used to make precise, splinter-free cuts that are safer than with a conventional table or radial arm saw. The angle unit supplied with the MFT3 Multi-Function Table attaches using the V-Groove side rail enabling easy removal and quick, accurate reattachment. Using the angle unit's detents, make precise angle cuts at common angles. Changing the cut angle is much easier when compared to a miter saw where the entire saw head must be repositioned. Allows the guide rail and saw to remain stationary while repositioning the workpiece and fenc. The angle stop, which is attached to the Multi-Function Table using the V-Groove side rail, prevents movement of the angle unit by stabilizing the end of the fence. The tensioning knobs are now placed further from the side of the MFT to provide ample room for rotating the knob without damaging your hands. Rubber foot caps protect the floor which is especially important while working on the job site. The integrated T-Groove side rail to quickly and easily connect two or more Multi-Function Tables (MFTs) to one another with the optional connectors (484 455) sold separately. The perforated work surface and integrated side rails of the Multi-Function Table provide a wide variety of clamping configurations. Built to be sturdy, the MFT can support loads up to 260 lbs. The threaded inserts not only prevent damage to the MDF top from over torquing but also establish a reference point when attaching the top.
- TS 55 REQ Plunge Cut Track Saw
- Imperial scale for setting the depth of cut
- Arbor size: .787" (20 mm)
- Bevel cuts: 0º - 45º
- Cutting depth on guide rail: 1-15/16" (50 mm) straight down and 1-7/16" (37 mm) at 45°
- Cutting depth without guide rail: 2 1/8" (55 mm) straight down
- Power consumption: 1200 watts / 10 amps 120 v AC
- Saw blade diameter: 6-1/4" (160 mm)
- Saw blade speed: 2,000 - 5,200 rpm
- Weight: 9.92 lbs. (4.5 kg)
- MFT/3 Multifunction Table
- Max. working width (with FS Guide Rail): 27-9/16" (700 mm)
- Max. workpiece thickness (with FS Guide Rail): 3-1/16" (78 mm)
- Table dimensions: 45-9/16" x 30-7/16" (1157 x 773 mm)
- Weight: 62 lbs (28 kg)
- Work space: 43-3/8" x 28-1/4" (1102 x 718 mm)
- Working height [folded down]: 35-7/16" [7-3/32"] (900 mm [180 mm])
TS 55 REQ Plunge Cut Track Saw, MFT/3 Multifunction Table, 55" guide rail, high-quality carbide blade, limit stop, Plug-it power cord, Splinterguard, Systainer, Adjustable stop, Angle unit (protractor head), Fence rail, Fence rail clamp, Guide rail FS 1080, Guide rail supports (2x), Hose Deflector.
- Additional Information
Includes 2 Tools Power Source Corded