DetailsThe OF 1400 Router provides 1400 watts of power in a machine that weighs less than 10 lbs. It accepts 1/2", 1/4" or 8 mm bits. With enough power to handle most routing tasks and small enough to be extremely maneuverable. Category-leading smooth 2-3/4" plunge action on precision ground rods and a double column clamp with a quick and secure plunge lock. Micro-adjustable depth control to 1/256" (1/10 mm) with ball detents which allows you to dial in your routing with tremendous precision. Ergonomic handle with full-grip is designed for increased control and reduced fatigue with power switch and speed control at the fingertips. MMC electronic controls provide constant speed under load for improved cut quality, step-less variable speed, and overload and thermal protection. One wrench bit changes with ratcheting action for faster and easier bit changes. Integrated dust extraction port extracts dust from the point of generation, increasing visibility and saving valuable clean-up time. The port is angled so that the hose stays in line with the power cord. Included chip deflector can be used with edge forming bits, maximizing chip and dust extraction even around curves and corners. Template guide bushings are self-centering and can be inserted tool-free. Designed for use with the FS guide rail system for guided cutting, VS 600 Dovetail jig for joinery applications, LR32 hole drilling system, MFS multirouting templates, and a wide range of other accessory options. Three adjustable position depth stop turret for repeatable and consistent step cutting. As with all Festool routers, the OF 1400 EQ has a center line indention on each side of the base.
The CT AutoClean has an integrated filter cleaning mechanism that periodically knocks the dust free of the filter. This guarantees maximum air flow and prevents the filter from becoming caked with dust. The filter cleaning frequency is controlled by a dial and can be completely disabled. The CT AutoClean can be used as a regular dust extractor when run without the AutoClean enabled. Includes an ultra-light weight, flexible anti-static (AS) hose for use with the PLANEX Drywall Sander and other tools that accept a 36mm (1-1/2") hose. Automatic Tool Start & adjustable suction with tool triggered or manual on-off switch and infinitely variable suction force, can be used wet or dry. Sys-dock and hose garage feature allows for the storage and transport of Festool Systainers (not included) on the top of the flat, low-profile unit. An ergonomic handle, large wheels, low center of gravity, and ergonomically balanced design allows you to move the CT effortlessly around the jobsite. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. With 137 CFM and only 62 dB (on the low setting), the CT 36 can quickly and quietly remove large amounts of debris, with minimal noise. A high performance 1-micron filter comes standard and offers the ultimate in clean air and filtration. The CT 36 AutoClean is specifically designed to complement the PLANEX Drywall Sander but can also be used as a general dust extractor for all tools. An optional smaller 27mm diameter hose may be required for some tools, such as sanders.
- OF 1400 EQ Plunge Router
- Imperial scale for setting the depth of cut
- Collet diameter range: 1/4", 1/2", and 8 mm
- Drive shaft speed: 10,000 - 22,500 rpm
- Power consumption: 1400 watts / 11.7 amps 120 v AC
- Quick depth adjustment range: 2-3/4" (70 mm)
- Weight: 9.9 lbs. (4.5 kg)
- CT 36 AutoClean Dust Extractor
- Container Capacity: 9.5 gal
- Dimensions (in.): 24.8" x 14.4" x 23.4"
- Filter Bag Capacity: 8.9 gal
- Max. Suction Force: 137 CFM
- Noise Level: 62 - 72 db(A)
- Power Consumption: 350-1200 watts, 2.9-10.0 amps
- Static Water Lift: 96"
- Weight: 29.8 lbs.
OF 1400 EQ Plunge Router, CT 36 AutoClean Dust Extractor, Chip catcher, Collet 1/2", Collet 1/4", Collet 8mm, Dust extraction hood, Guide rods, Plug-it power cord, Standard U.S. guide bushing adapter, Systainer, 36mm Antistatic Hose, Cord Wrap, Hose Garage, Self-Cleaning Filter Bag.
- Additional Information
Includes 2 Tools Power Source Corded