Festool PAC574689 OF 2200 and CT 36 AC Package

Festool PAC574689 OF 2200 and CT 36 AC Package
OF 2200 EB Router + CT 36 AutoClean Dust Extractor Package. The OF 2200 EB Router can plunge into 8/4 hard maple and make a 1/2" groove in a single pass with 2200 watts of power. CT 36 AutoClean is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. This represents greater efficiency in dust extraction, noise reduction, and with less energy consumption versus a constant-on unit.


The OF 2200 is Festool's most powerful router. The Dust Extraction Column is placed on the back of the OF 2200 and extends to the top of the router and includes a swivel nozzle. Maximize dust extraction using the 360° swiveling Dust Extraction Chip Deflector. Keeps the power cord (also top mounted) and dust extraction hose out of your way. Controls are clearly labeled with icons indicating purpose and adjustment direction. Use the onboard variable speed dial cross reference to select the appropriate spindle speed based on material and application. The Magnetic Spindle Brake of the OF 2200 is a faster, more reliable method of retarding spindle motion. The use of magnetic force to stop the spindle also prolongs the service life of the motor versus a mechanical or electronic method. With 80mm of travel, the plunge depth of the OF 2200 is phenomenal. The collet actually plunges 10mm below the base of the router providing another option for bit changes. Use the micro-adjustment knob to fine tune plunge depth in increments of 1/256" (1/10mm). The four position depth stop turret provides pre-configurable plunge depths including a 5/64" (2mm) finishing pass setting.. The OF 2200 Router features a Triple Bearing Design which dampens spindle and bit deflection. With bearings at the top, middle and bottom, the spindle is less likely to wobble. Use the Variable Speed Control of the OF 2200 to dial in the appropriate spindle speed based on the material and application. An onboard cross reference guide shows the spindle RPM for each setting. The OF 2200 employs Multi-Material Control (MMC) electronics to ensure constant speed under load. Locking Depth Stop Rod allows you save time by locking the OF 2200 in its plunged position and calibrate the plunge depth using the four-position depth stop turret in a single step. Use the spindle locking lever to disengage spindle movement and loosen the collet with a ratcheting motion. The ingenious retractable 360° dust shroud and wide plunge column spacing enables open access to the collet. The Retractable, Spring-Loaded 360° Dust Shroud maximizes dust extraction while providing high visibility of the workpiece. With an opening of 3-3/8" on the standard base, the OF 2200 can take advantage of a full assortment of router bits. Double Locking Plunge Columns, Four Position Depth Stop Turret and the 30° offset of the handles.

The CT AutoClean has an integrated filter cleaning mechanism that periodically knocks the dust free of the filter. This guarantees maximum air flow and prevents the filter from becoming caked with dust. The filter cleaning frequency is controlled by a dial and can be completely disabled. The CT AutoClean can be used as a regular dust extractor when run without the AutoClean enabled. Includes an ultra-light weight, flexible anti-static (AS) hose for use with the PLANEX Drywall Sander and other tools that accept a 36mm (1-1/2") hose. Automatic Tool Start & adjustable suction with tool triggered or manual on-off switch and infinitely variable suction force, can be used wet or dry. Sys-dock and hose garage feature allows for the storage and transport of Festool Systainers (not included) on the top of the flat, low-profile unit. An ergonomic handle, large wheels, low center of gravity, and ergonomically balanced design allows you to move the CT effortlessly around the jobsite. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. With 137 CFM and only 62 dB (on the low setting), the CT 36 can quickly and quietly remove large amounts of debris, with minimal noise. A high performance 1-micron filter comes standard and offers the ultimate in clean air and filtration. The CT 36 AutoClean is specifically designed to complement the PLANEX Drywall Sander but can also be used as a general dust extractor for all tools. An optional smaller 27mm diameter hose may be required for some tools, such as sanders.

  • OF 2200 EB Router
  • Imperial scale for setting the depth of cut
  • Collet diameter range: 1/4", 1/2", and 8 mm
  • Drive shaft speed: 10,000 - 22,000 rpm
  • Max. Bit Diameter: 3-1/2" (89 mm)
  • Power consumption: 15 amps
  • Quick depth adjustment range: 3-5/32" (80 mm)
  • Weight: 17.2 lbs. (7.8 kg)
  • CT 36 AutoClean Dust Extractor
  • Container Capacity: 9.5 gal
  • Dimensions (in.): 24.8" x 14.4" x 23.4"
  • Filter Bag Capacity: 8.9 gal
  • Max. Suction Force: 137 CFM
  • Noise Level: 62 - 72 db(A)
  • Power Consumption: 350-1200 watts, 2.9-10.0 amps
  • Static Water Lift: 96"
  • Weight: 29.8 lbs.

OF 2200 EB Router, CT 36 AutoClean Dust Extractor, Chip catcher, Collet 1/2", Dust extraction hood, Standard U.S. guide bushing adapter, Systainer, 36mm Antistatic Hose, Cord Wrap, Hose Garage, Self-Cleaning Filter Bag.

Additional Information

Additional Information

Includes 2 Tools
Power Source Corded