Festool P26574692 OF 1400 and CT 26 HEPA Package

Festool P26574692 OF 1400 and CT 26 HEPA Package
OF 1400 EQ Plunge Router + CT 26 HEPA Dust Extractor Package. OF 1400 EQ Plunge Router has a category-leading 2-3/4" plunge depth, precise to 1/256" (1/10 mm), this router gives you the power, precision, depth of cut, and dust extraction capabilities that will simplify your routing tasks. CT 26 HEPA Dust Extractor features Automatic Tool Start and adjustable suction with tool triggered or manual on-off switch and infinitely variable suction force.


The OF 1400 Router provides 1400 watts of power in a machine that weighs less than 10 lbs. It accepts 1/2", 1/4" or 8 mm bits. With enough power to handle most routing tasks and small enough to be extremely maneuverable. Category-leading smooth 2-3/4" plunge action on precision ground rods and a double column clamp with a quick and secure plunge lock. Micro-adjustable depth control to 1/256" (1/10 mm) with ball detents which allows you to dial in your routing with tremendous precision. Ergonomic handle with full-grip is designed for increased control and reduced fatigue with power switch and speed control at the fingertips. MMC electronic controls provide constant speed under load for improved cut quality, step-less variable speed, and overload and thermal protection. One wrench bit changes with ratcheting action for faster and easier bit changes. Integrated dust extraction port extracts dust from the point of generation, increasing visibility and saving valuable clean-up time. The port is angled so that the hose stays in line with the power cord. Included chip deflector can be used with edge forming bits, maximizing chip and dust extraction even around curves and corners. Template guide bushings are self-centering and can be inserted tool-free. Designed for use with the FS guide rail system for guided cutting, VS 600 Dovetail jig for joinery applications, LR32 hole drilling system, MFS multirouting templates, and a wide range of other accessory options. Three adjustable position depth stop turret for repeatable and consistent step cutting. As with all Festool routers, the OF 1400 EQ has a center line indention on each side of the base.

The CT 26 is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. Represents greater efficiency in dust extraction, noise reduction, and less energy consumption versus a constant-on unit. Variable suction force allows you to regulate the suction based on your tasks. Includes a self-cleaning bag which prevents dust particles from caking inside the bag which reduces suction. Low-profile, flat-top design allows the CT top to double as a tool rest as well as an integrated hose garage and docking station that allows the connection of Festool Systainers. The low center of gravity, integrated center handle, and extra large wheels make navigating easy without tipping over. A parking brake can even be locked to prevent unintentional roll off or drifting. The supplied 11-1/2 ft. anti-static (AS) hose is long enough for power tool and general work site clean up tasks. Supplied with 11-1/2 foot long anti-static hose that is flexible and kink-resistant and will minimize shock hazards as well as reduce static cling. For wet (water) clean up tasks, the CT will shut off automatically when full thanks to Level Stop technology. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. Large wheels, low center of gravity, and ergonomically balanced design allows you to move the CT effortlessly. Sys-dock and hose garage feature allows for the storage and transport of Festool Systainers on the top of the flat, low-profile unit.

  • OF 1400 EQ Plunge Router
  • Imperial scale for setting the depth of cut
  • Collet diameter range: 1/4", 1/2", and 8 mm
  • Drive shaft speed: 10,000 - 22,500 rpm
  • Power consumption: 1400 watts / 11.7 amps 120 v AC
  • Quick depth adjustment range: 2-3/4" (70 mm)
  • Weight: 9.9 lbs. (4.5 kg)
  • CT 26 HEPA Dust Extractor
  • Container Capacity: 6.9 gal. (26 liters)
  • Dimensions (in.): 24.8 x 14.4 x 21.5
  • Filter Bag Capacity: 6.3 gal.
  • Filter Type: HEPA
  • Max. Suction Force: 137 CFM
  • Noise Level: 62 - 72 db(A)
  • Power Consumption: 350 - 1200 watts, 2.9 - 10.0 amps
  • Static Water Lift: 96"
  • Weight: 28.7 lbs

OF 1400 EQ Plunge Router, CT 26 HEPA Dust Extractor, Chip catcher, Collet 1/2", Collet 1/4", Collet 8mm, Dust extraction hood, Guide rods, Plug-it power cord, Standard U.S. guide bushing adapter, Systainer, 27mm Antistatic Hose, Cord Wrap, Hose garage, Self-Cleaning Filter Bag.

Additional Information

Additional Information

Includes 2 Tools
Power Source Corded