DetailsThe OF 2200 is Festool's most powerful router. The Dust Extraction Column is placed on the back of the OF 2200 and extends to the top of the router and includes a swivel nozzle. Maximize dust extraction using the 360° swiveling Dust Extraction Chip Deflector. Keeps the power cord (also top mounted) and dust extraction hose out of your way. Controls are clearly labeled with icons indicating purpose and adjustment direction. Use the onboard variable speed dial cross reference to select the appropriate spindle speed based on material and application. The Magnetic Spindle Brake of the OF 2200 is a faster, more reliable method of retarding spindle motion. The use of magnetic force to stop the spindle also prolongs the service life of the motor versus a mechanical or electronic method. With 80mm of travel, the plunge depth of the OF 2200 is phenomenal. The collet actually plunges 10mm below the base of the router providing another option for bit changes. Use the micro-adjustment knob to fine tune plunge depth in increments of 1/256" (1/10mm). The four position depth stop turret provides pre-configurable plunge depths including a 5/64" (2mm) finishing pass setting. The OF 2200 Router features a Triple Bearing Design which dampens spindle and bit deflection. With bearings at the top, middle and bottom, the spindle is less likely to wobble. Use the Variable Speed Control of the OF 2200 to dial in the appropriate spindle speed based on the material and application. An onboard cross reference guide shows the spindle RPM for each setting. The OF 2200 employs Multi-Material Control (MMC) electronics to ensure constant speed under load. Locking Depth Stop Rod allows you save time by locking the OF 2200 in its plunged position and calibrate the plunge depth using the four-position depth stop turret in a single step. Use the spindle locking lever to disengage spindle movement and loosen the collet with a ratcheting motion. The ingenious retractable 360° dust shroud and wide plunge column spacing enables open access to the collet. The Retractable, Spring-Loaded 360° Dust Shroud maximizes dust extraction while providing high visibility. With an opening of 3-3/8" on the standard base, the OF 2200 can take advantage of a full assortment of router bits. Double Locking Plunge Columns and Four Position Depth Stop Turret and the 30° offset of the handles. The sub-base of the OF 2200 is designed to prevent scratches, glides easily and offers a flat bearing surface. The OF 2200 features a self-centering, magnetic, keyed socket for accepting template guides. Use the spring loaded release lever to remove the hinged bases from the OF 2200. Quad Center Lines on each of the four "sides" of the router and provide an easy reference point.
The CT 26 is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. Represents greater efficiency in dust extraction, noise reduction, and less energy consumption versus a constant-on unit. Variable suction force allows you to regulate the suction based on your tasks. Includes a self-cleaning bag which prevents dust particles from caking inside the bag which reduces suction. Low-profile, flat-top design allows the CT top to double as a tool rest as well as an integrated hose garage and docking station that allows the connection of Festool Systainers. The low center of gravity, integrated center handle, and extra large wheels make navigating easy without tipping over. A parking brake can even be locked to prevent unintentional roll off or drifting. The supplied 11-1/2 ft. anti-static (AS) hose is long enough for power tool and general work site clean up tasks. Supplied with 11-1/2 foot long anti-static hose that is flexible and kink-resistant and will minimize shock hazards as well as reduce static cling. For wet (water) clean up tasks, the CT will shut off automatically when full thanks to Level Stop technology. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. Large wheels, low center of gravity, and ergonomically balanced design allows you to move the CT effortlessly. Sys-dock and hose garage feature allows for the storage and transport of Festool Systainers on the top of the flat, low-profile unit.
- OF 2200 EB Router
- Imperial scale for setting the depth of cut
- Collet diameter range: 1/4", 1/2", and 8 mm
- Drive shaft speed: 10,000 - 22,000 rpm
- Max. Bit Diameter: 3-1/2" (89 mm)
- Power consumption: 15 amps
- Quick depth adjustment range: 3-5/32" (80 mm)
- Weight: 17.2 lbs. (7.8 kg)
- CT 26 HEPA Dust Extractor
- Container Capacity: 6.9 gal. (26 liters)
- Dimensions (in.): 24.8 x 14.4 x 21.5
- Filter Bag Capacity: 6.3 gal.
- Filter Type: HEPA
- Max. Suction Force: 137 CFM
- Noise Level: 62 - 72 db(A)
- Power Consumption: 350 - 1200 watts, 2.9 - 10.0 amps
- Static Water Lift: 96"
- Weight: 28.7 lbs
OF 2200 EB Router, CT 26 HEPA Dust Extractor, Chip catcher, Collet 1/2", Dust extraction hood, Standard U.S. guide bushing adapter, Systainer, 27mm Antistatic Hose, Cord Wrap, Hose garage, Self-Cleaning Filter Bag.
- Additional Information
Includes 2 Tools Power Source Corded