DetailsThe TS 75 EQ Plunge Cut Track Saw ia capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. Suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. When used with Festool guide rails, you have ultimate control over the TS saw for perfectly straight cuts. Add the replaceable splinterguard, and a splinter-free cut is achievable on both sides of the blade. Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback. The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor. Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal. The TS 75 makes the actual cut right on the edge of the scribe line, even on bevel cuts. Variable speed allows you to match the speed of the saw to the material. The electronics maintain a consistent speed under load, improving cut performance and protecting the saw’s motor from thermal and current overload. Simple depth adjustment allows you to expose only the part of the blade necessary for the cut. The plunge action allows cut placement anywhere on the cut line for straight cuts or cut-outs into material.
The CT 26 is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. This represents greater efficiency in dust extraction, noise reduction, and with less energy consumption versus a constant-on unit. Variable suction force allows you to regulate the suction based on your tasks. A small detail sander may not require the full 137 CFM of this unit, but a router may require it. Includes a self-cleaning bag which prevents dust particles from caking inside the bag which reduces suction. Low-profile, flat-top design allows the CT top to double as a tool rest as well as an integrated hose garage and docking station that allows the connection of Festool Systainers (not included) for easy transport and storage. The low center of gravity, integrated center handle, and extra large wheels make navigating rough terrain in the shop or jobsite easy without tipping over. A parking brake can even be locked to prevent unintentional roll off or drifting. The supplied 11-1/2 ft. anti-static (AS) hose is long enough for power tool and general work site clean up tasks. Supplied with 11-1/2 foot long anti-static hose that is flexible and kink-resistant and will minimize shock hazards as well as reduce static cling. For wet (water) clean up tasks, the CT will shut off automatically when full thanks to Level Stop technology. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. Large wheels, low center of gravity, and ergonomically balanced design allows you to move the CT effortlessly around the jobsite. Sys-dock and hose garage feature allows for the storage and transport of Festool Systainers (not included) on the top of the flat, low-profile unit.
- TS 75 EQ Plunge Cut Track Saw
- Imperial scale for setting the depth of cut
- Arbor size: 1.101" (30 mm)
- Bevel cuts: 0º - 45º
- Cutting depth on guide rail: 2-3/4" (70 mm) straight down and 2 1/8" (55 mm) at 45°
- Cutting depth without guide rail: 2-15/16" (75 mm) straight down
- Power consumption: 1600 watts / 13 amps 120 v AC
- Saw blade diameter: 8-1/4" (210 mm)
- Saw blade speed: 1,350 - 3,550 rpm
- Weight: 13.6 lbs. (6.2 kg)
- CT 26 HEPA Dust Extractor
- Container Capacity: 6.9 gal. (26 liters)
- Dimensions (in.): 24.8 x 14.4 x 21.5
- Filter Bag Capacity: 6.3 gal.
- Filter Type: HEPA
- Max. Suction Force: 137 CFM
- Noise Level: 62 - 72 db(A)
- Power Consumption: 350 - 1200 watts, 2.9 - 10.0 amps
- Static Water Lift: 96"
- Weight: 28.7 lbs
561438 TS 75 EQ Plunge Cut Track Saw, 75" guide rail, limit stop, Plug-it power cord, saw blade, slipclutch, splinterguard, Systainer, 583492 CT 26 HEPA Dust Extractor, 27mm antistatic hose, cord wrap, hose garage, and self-cleaning filter bag.
- Additional Information
Includes 2 Tools Power Source Corded