DetailsThe ETS 150/3 is a favorite for fine sanding and extra-fine sanding, producing an excellent surface finish with a short 1/8" (3.0 mm) stroke. Features a rubberized top grip, ergonomic handle, finger tip switch and vibration-stop balancing to reduce the discomfort normally associated with sanding. Jetstream dust extraction improves the surface finish by removing dust particles as they are generated, while at the same time, prolonging pad and abrasive life. With soft-start, step-less speed controls, and constant speed under load, these sanders perform on a level that you are not likely to have experienced. MMC electronic controls deliver soft-start, step-less variable speed control, and constant speed under load. StickFix fast and easy abrasive removal with resilient pad hooks and hard-wearing fabric backing, leading to longer abrasive and pad life. Lockable switch allows for uninterrupted running for optimum control. Pad Brake stops the pad quickly, so you can worry less about damaging your freshly finished workpiece when setting your tool down.
The CT 26 is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. Represents greater efficiency in dust extraction, noise reduction, and less energy consumption versus a constant-on unit. Variable suction force allows you to regulate the suction based on your tasks. Includes a self-cleaning bag which prevents dust particles from caking inside the bag which reduces suction. Low-profile, flat-top design allows the CT top to double as a tool rest as well as an integrated hose garage and docking station that allows the connection of Festool Systainers. The low center of gravity, integrated center handle, and extra large wheels make navigating easy without tipping over. A parking brake can even be locked to prevent unintentional roll off or drifting. The supplied 11-1/2 ft. anti-static (AS) hose is long enough for power tool and general work site clean up tasks. Supplied with 11-1/2 foot long anti-static hose that is flexible and kink-resistant and will minimize shock hazards as well as reduce static cling. For wet (water) clean up tasks, the CT will shut off automatically when full thanks to Level Stop technology. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. Large wheels, low center of gravity, and ergonomically balanced design allows you to move the CT effortlessly. Sys-dock and hose garage feature allows for the storage and transport of Festool Systainers on the top of the flat, low-profile unit.
- ETS 150/3 EQ Random Orbital Finish Sander
- Dust extraction port: 27 mm
- Pad diameter: 6" (150 mm)
- Power consumption: 310 watts / 2.6 amps 120 v AC
- Sanding Stroke: 1/8" (3 mm)
- Speed: 6,000 - 10,500 opm
- Weight: 4 lbs. (1.8 kg)
- CT 26 HEPA Dust Extractor
- Container Capacity: 6.9 gal. (26 liters)
- Dimensions (in.): 24.8 x 14.4 x 21.5
- Filter Bag Capacity: 6.3 gal.
- Filter Type: HEPA
- Max. Suction Force: 137 CFM
- Noise Level: 62 - 72 db(A)
- Power Consumption: 350 - 1200 watts, 2.9 - 10.0 amps
- Static Water Lift: 96"
- Weight: 28.7 lbs
ETS 150/3 EQ Random Orbital Finish Sander, CT 26 HEPA Dust Extractor, Filter bag with holder, Plug-it power cord, StickFix sanding pad soft, Systainer, 27mm Antistatic Hose, Cord Wrap, Hose garage, Self-Cleaning Filter Bag.
- Additional Information
Includes 2 Tools Power Source Corded