Delta S26-260L ShopMaster 10 Inch Miter Saw with Laser

More Views

Delta S26-260L ShopMaster 10 Inch Miter Saw with Laser
$129.00
This tool features a powerful 15-amp motor with all ball bearings and externally accessible brushes for ease of servicing.
Description

Details

This tool features a powerful 15 amp motor with all ball bearings and externally accessible brushes for ease of servicing. The miter fence supports the workpiece when making all cuts. The throat plate supports the workpiece and provides a safe working surface. The miter lock handle securely locks the saw at desired miter angles. Miter control arm is mounted to the Work Table and provides a stable connection in order to pivot the Work Table at the desired miter angle. Miter gauge with positive stops - positive stops have been provided at 0°, 15°, 22-1/2°, 31.6°, and 45°. The positive stops have been provided on both the left and right side of the miter table. The horizontal work clamp helps to position and secure the workpiece to the fence, ensuring safer operation and more accurate cuts. Base supports the tool and features mounting holes. Mounting holes enable you to securely mount the tool to a stable surface. The included blade wrench features a Phillips screwdriver at one end and a hex key at the other. Use the hex key when installing or removing blade and the Phillips screwdriver when removing or loosening screws. When not in use, the wrench can be stored in the base of the saw. The die-cast aluminum work table provides a level and sturdy work surface. The bevel lock secures the saw at the desired angle for bevel cuts. There are positive stop screws on each side of the saw arm for making fine adjustments at 0° and 45°. The included dust bag attaches and detaches quickly with the integrated clamp for easy cleaning. The lower blade guard is made of shock-resistant, see-through plastic that provides protection from each side of the blade. It automatically retracts over the upper blade guard as the saw is lowered into the workpiece. A 10 in. blade is included with the compound miter saw. It will cut materials up to 3-1/2 in. thick or 5-1/2 in. wide, depending upon the angle at which the cut is being made. The saw blade is activated by an easy-to-use switch. When not in use the saw should be disconnected from the power supply and switch locked in the off position using a padlock (not included) inserted through the hole in the switch trigger. A lock with a long shackle up to 5/16 in. diameter may be used. The padlock and key should be stored in separate locations. The spindle lock button locks the spindle preventing the blade from rotating while removing or installing the blade screw. An electric brake has been provided to more quickly stop blade rotation after the switch is released. For more accurate cuts, a laser guide is included with your miter saw. When used properly, the laser guide makes accurate, precision cutting simple and easy.

Features

Lightweight unit is easy to move from room to room or even from job to job. Works with virtually all miter saw stands. Spindle lock holds spindle securely while bade nut is loosened and removed. Cuts nominal 4x4 and 2x6 at 90° and 2x6 with one pass. Bevels left - from 0°- 47°, cuts nominal 2x6 at full bevel. Mitering Capabilities - Miters to 45° degrees left and right with stops at 0°, 15°, 22.5°, 30° and 45°. Laser – battery operated with on/off switch. Makes aligning blade to workpiece more convenient and precise. Electric brake stops the blade within seconds of releasing switch. UL Listed. Speed (RPM) 5,500 r/min. 15 Amps, 120 volts. Blade size 10 inch diameter. Arbor size 5/8 inch diameter. Weight 31 lbs. 3 year warranty.

Includes

(1) S26-260L ShopMaster 10 Inch Miter Saw With Laser, (1) 10 Inch Blade, (1) Dust Collection Bag, (1) Horizontal Work Clamp, (1) Miter Lock Knob, (1) Blade Wrench, (2) AAA Batteries.

Additional Information

Additional Information

Drive Type 5/8" Arbor
Power Source Corded
Size Range 9 Inch - 10-7/8 Inch
Use For Material Wood
Reviews